View LA6500_291978.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number: EN2623D
Monolithic Linear IC
LA6500
Power Operational Amplifier
Features
Package Dimensions
unit : mm
. High output current (Io max = 1.0 A) . High gain . With current limiter . Capable of being operated from single supply
3079-SIP-5H
[LA6500]
SANYO : SIP-5H
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Differential input voltage Common-mode input voltage Output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC/VEE VIDIf VICOM Io max Pd max Topr Tstg Conditions Ratings 18 30 15 1.0 1.75 -20 to +75 -55 to +150 Unit V V V A W C C
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
32896HA(II)/7297TA,TS No.2623-1/3
LA6500
Operating Characteristics at Ta = 25C, VCC/VEE = 15 V
Parameter Quiescent current dissipation Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection Maximum output voltage Voltage gain Slew rate Equivalent input noise voltage Supply voltage rejection Limiting current Symbol ICCO VIO IIO IB VICM CMR Vo VGO SR VNI SVR ISC RL = 33 GV = 0, RL = 33 , R = 2.2 , L = 0.1 F Rg = 1 k, DIN Audio Conditions Rs % 10 k min typ 6 2 10 100 max Unit mA mV nA nA V dB V dB V/s V V/V A
-15 80 13 100 0.15 2 30 1.00
+13
Sample Application Circuit
Allowable power dissipation, Pd max - W
Infinite heat sink
5C/W heat sink 10C/W heat sink 20C/W heat sink No heat sink
Ambient temperature, Ta - C
No.2623-2/3
LA6500
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of March, 1996. Specifications and information herein are subject to change without notice. PS No.2623-3/3

▲Up To Search▲

Price & Availability of LA6500

	To Download LA6500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .